Teka EM 30 2P Manuel d'utilisateur télécharger pdf (Page 16)

GB

16

When first connecting, or if the hotplate

has not been used for some time, the

moisture absorbed by the insulation needs

to be eliminated. To carry out this drying

process, turn the hotplate on - with no pan

on it - for five minutes at switch position 2.

The smell and smoke that are emitted,

while unpleasant, present no risk, and you

should assist ventilation by opening doors

and windows to let the outside air in.

Model EM/30 2P T has a further control, a

timer, which limits the degree to which the

hotplates heat up, according to the time

which has been set. The timer should

never be set to zero if the hotplates are to

work.

Suggestions for effective use

of the electric hotplates

To ensure maximum performance from

your hob, follow these guidelines:

* Use pans with a flat base, as the greater

the surface contact between the pan

and the hotplate, the greater will be the

heat transmission. We recommend the

use of heavy pans so that the base is

more difficult to dent. The picture shows

how pans with battered or dented bases

have less surface contact. (See fig. 8)

* Do not use pans with a diameter that is

smaller than that of the hotplate, in order

to avoid boiling foods spilling over onto

the hotplates.

* Dry the bottom of your pans before put-

ting them on the hotplates.

* When you are almost finished cooking, it

is a good idea to set the hotplate to the

minimum or to turn it off just before

removing the pan, in order to make use

of the energy that has been stored and

to avoid the hotplate operating while it is

empty.

Never use the electric hotplate

without a pan on it.

Cleaning and looking

after the hotplates

* Disconnect the appliance from the elec-

tric mains before cleaning it.

* Do not use cleaning products that can

harm aluminium, such as soda, acids, etc.

fig. 8

Right Wrong Wrong

fig. 7

‘Hotplate in operation’ indicator

Control index

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire