Teka EM 30 2P Manuel d'utilisateur télécharger pdf (Page 21)

If something doesn’t work

Fault Possible cause Possible solution

Neither the hotplates nor the pilot lights are working

The cable is not connected

to the mains

Connect the cable

to the mains

There is no spark when the

automatic ignition control is pressed

There is no current at

the plug

Check/repair the electri-

city at the mains

The gas burners are making the pans dirty

The burner openings

are dirty

Clean the burners’

openings

The injector or injector

holder is dirty

Clean the holders injector

and injector without using

anything which could dama-

ge or alter the diameter of

the gas outlet opening

Before calling the Technical Service, please

make the following checks:

There is a spark but the burner is not igniting

The spark plug and the part

of the burner where the

spark should be is soiled or

greasy

Clean the end of the

spark plug and the

burner

Do not light the gas burners

Gas is not coming through

to the hob

Check that the gas

cylinder tap is properly

open

If it is piped gas, open

the gas tap

The burner ignites but, when you stop holding down the

knob that activates the safety feature, it goes out again

The flame is not appearing

in the area heated by the

thermocouple

Clean the burner’s

openings

The pan is sticking to the glass

Something has melted bet-

ween the pan and the glass.

Pans with aggressive bases.

Set the hotplate to full

power and try to unstick it.

Check the bases of your

pans and do not slide

them across the glass.

1 2 ... 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire

Teka EM 30 2P Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Teka EM 30 2P