Teka EM 30 2P Manuel d'utilisateur télécharger pdf (Page 15)

GB

15

that have lengthy contact with the ena-

mel surfaces.

* The stainless steel should be washed in

soapy water using a soft cloth. If the

metal is yellowish after washing, we

recommend that you use: lemon, vine-

gar, dilute amonia or a cleaning product

that contains dilute amonia.

* When cleaning the appliance with the

burners removed, care should be taken

not to allow liquid or other objects to get

into the injector openings.

* When cleaning, do not use products that

can harm aluminium, such as soda, oil,

etc.

Note: Whenever you replace a burner,

you should check that all of the parts

are properly in place. A part that is not

in the right place can cause poor com-

bustion and/or overheating.

Maintaining the burners

Whenever the gas taps are removed, you

should change the washer that is between

the taps and the supply pipe. The burners

are working properly when their flame is

stable and a greeny-blue colour. If the tip

of the flame is yellow, the burners need to

be cleaned; if the problem persists, contact

the Technical Service.

In order to guarantee that the gas installa-

tion is properly sealed and that the burners

are working properly, the hob needs to be

inspected by specialised Technical Service

personnel at least once every 4 years.

Note: Any alteration or adjustment nee-

ded by the appliance should be made

by authorised technical personnel.

Operation of models with

electric hotplates

The electric hotplates are controlled by a

switch with seven positions (see fig. 7). To

get different levels of power, all you need

to do is to turn the appropriate knob and

set it to the position you want. On the con-

trol panel, areas are marked (A) that show

(with a circle) the control for each hotplate.

The pan should be placed on the hotplate

before ignition.

The power corresponding to each of the

switch’s positions is as follows:

The Ø145 mm 1500 W hotplate (the one

with the red dot) heats up rapidly and

achieves its maximum during around the

first five minutes, after which its power

decreases to 750 W, at which point the

temperature becomes constant.

Hotplate Ø 145 -1500 W.

Power

Control set to

Hotplate Ø 180 -1500 W.

Switched off

135 W

220 W

300 W

850 W

1150 W

1500 W

Power

0

1

2

3

4

5

6

Control set to

Switched off

135 W

165 W

250 W

500 W

750 W

1500 W

0

1

2

3

4

5

6

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Commentaires sur ces manuels

Pas de commentaire